Low Observable Coater

Job Description:

Description:Performs all low observable (LO) coating applications on completed canopy assemblies, including boot installation and LO specific treatments. Plans and prepare each job by reviewing blueprints, engineering specifications, and work orders to determine the optimal sequence of operations, the exact quantity of parts required, and the most efficient set up method. Sets up and operates coating expendables, selecting and using the appropriate hand tools as well as precision measurement tools to verify dimensions and ensure correct coating thickness. Performs standard shop calculations for preparation, flash-offs, cure cycles, and documents all required data collections in the manufacturing execution system. Monitors and verifies product quality using F-35 specifications, in process inspections with quality assurance, and established control plans, adjusting as needed to maintain compliance with engineering tolerances. Collects, enters, and maintains all required data and documentation, ensuring adherence to Lockheed Martin’s safety, environmental, and quality standards.

F 35 Canopy – Low Observable (LO) Coating Technician
Key Responsibilities

• Surface Preparation & Protection – Strip, clean, sand, and chemically treat aircraft exterior panels and acrylic canopy sections; apply masking, primers, and anti corrosion treatments in accordance with MIL STD specifications.
• LO Coating Application – Mix, meter, and spray low observable coatings, fastener gap fillers, and sealants; install thermal/stealth boot assemblies while maintaining required thickness tolerances.
• Precision Hand Rolling & Masking – Hand roll and mask acrylic and sheet metal surfaces to achieve seamless finish transitions around complex geometries and connector interfaces.
• Blueprint & Work Order Interpretation – Read and analyze engineering drawings, schematics, and work orders to determine the optimal operation sequence, part count, and set up configuration; develop lay out plans that minimize re work.
• Tool & Instrument Utilization – Select and operate a full range of hand, power, and pneumatic tools; employ precision measuring devices (micrometers, laser gauges, thickness gauges, digital calipers) to verify dimensions and coating thicknesses to ±0.005 in.
• Process Calculations & Documentation – Perform shop floor calculations for surface preparation times, coating cure cycles, and bake out parameters; record all data in the Manufacturing Execution System (MES) and update work orders as required.
• Quality Assurance – Work with quality assurance to conduct in process inspections using Statistical Process Control (SPC) guidance and established control plans; identify deviations, adjust process variables, and document corrective actions as directed.
• Data Management – Capture, enter, and maintain production, inspection, and material lot data; generate required reports for traceability and compliance audits.
• Physical Demands – Routinely stoop, bend, kneel, and squat while working inside or around the canopy assembly; lift and maneuver components up to 20 lb using approved lifting techniques.
• Additional Duties – Perform any other tasks assigned to support schedule adherence, safety compliance, and continuous improvement initiatives.
• Physical Capability – Able to stoop, kneel, squat, and lift/push/pull up to 20 lb on occasion during a 10 hour shift.
Basic Qualifications:
• 1 year minimum of experience with composite/LO application.

• Must have high school diploma/GED.

• Experience with reading blueprints, interpret drawings, and use MS office software.

• Experience with sanding tools, cutters, brushes, templates, and hand rollers.
Desired Skills:
. F-117, F-22, F-35, B-2, or LO manufacturing experience
• Direct work with LO paints, radar absorbent sealants, gap filler compounds, and stealth boot systems on F 35 or comparable aircraft.
• Familiarity with the full LO process flow: material mixing, temperature controlled topcoat application, thickness understanding, and post cure inspection.
• Ability to read and follow the specific handling, storage, and safety data sheets (SDS) that govern LO chemistries (e.g., MIL PRF 38534, MIL STD 1540).
• Clear, concise verbal reporting to supervisors, engineers, and quality personnel
• Effective collaboration with cross functional teams—including design engineers, production planners, and safety
• Daily use electronic work orders such as Solumina or similar types, ensuring all required fields (part numbers, material lot numbers, dates) are accurately entered.
• Use of Outlook for electronic correspondence from leadership team, support departments, and other related use such as calendar/ training events.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: AERONAUTICS COMPANY
Relocation Available: No
Career Area: Assembly/Laborers
Type: Full-Time
Shift: First

. F-117, F-22, F-35, B-2, or LO manufacturing experience
• Direct work with LO paints, radar absorbent sealants, gap filler compounds, and stealth boot systems on F 35 or comparable aircraft.
• Familiarity with the full LO process flow: material mixing, temperature controlled topcoat application, thickness understanding, and post cure inspection.
• Ability to read and follow the specific handling, storage, and safety data sheets (SDS) that govern LO chemistries (e.g., MIL PRF 38534, MIL STD 1540).
• Clear, concise verbal reporting to supervisors, engineers, and quality personnel
• Effective collaboration with cross functional teams—including design engineers, production planners, and safety
• Daily use electronic work orders such as Solumina or similar types, ensuring all required fields (part numbers, material lot numbers, dates) are accurately entered.
• Use of Outlook for electronic correspondence from leadership team, support departments, and other related use such as calendar/ training events.

Job Ident #: 91383924304

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/

Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Pinellas Park, Florida, United States

Type

Permanent

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/